Section 627.0629(1), Florida Statutes, requires a residential property insurance rate filing to include actuarially reasonable discounts, credits, other rate differentials, or deductible reductions for properties with fixtures or construction techniques shown to reduce windstorm loss. These must include, at a minimum, techniques that enhance wind uplift prevention, roof strength, roof covering performance, roof-to-wall strength, wall-to-floor-to-foundation strength, opening protection, and window, door, and skylight strength. Credits for fixtures and techniques that meet the minimum requirements of the Florida Building Code must be included. Since October 1, 2023, each insurer subject to the section must describe its available hurricane mitigation discounts on its website, and the Office of Insurance Regulation must reevaluate the discounts on or before January 1, 2025, and every 5 years after that. [us-032]
Chapter 2 of the Florida Building Code, Building, 8th Edition (2023), defines the High Velocity Hurricane Zone as consisting of Broward and Miami-Dade counties. The same chapter defines a wind-borne debris region as areas within hurricane-prone regions located within 1 mile (1.61 km) of the mean high-water line where an Exposure D condition exists upwind at the waterline and the ultimate design wind speed, Vult, is 130 mph or greater. A wind-borne debris region also includes areas where the ultimate design wind speed, Vult, is 140 mph (63.6 m/s) or greater. [us-006]
Section 553.842, Florida Statutes, directs the Florida Building Commission to adopt rules for a statewide product evaluation and approval system that operates in coordination with the Florida Building Code. The Commission must use one of the statutory approval methods for panel walls, exterior doors, roofing, skylights, windows, shutters, impact protective systems, and structural components as established by rule. A product may not be advertised, sold, or marketed as hurricane, windstorm, or wind-borne debris impact protection unless it is approved under section 553.842 or s. 553.8425. The statute specifically names the Miami-Dade County Building Code Compliance Office Product Control Division among the approved evaluation entities. [us-007]
The Miami-Dade County Product Control Section receives applications for product approval and reviews and approves or denies building construction materials, products, and systems used to protect the building envelope. The Section mainly addresses windows, exterior glazing, wall cladding, roofing, exterior doors, skylights, glass block, siding, and shutters. A first-time product approval costs $4,000 and is valid for five years, a revision or renewal costs $1,500, and all fees are subject to a 7.5% surcharge. The County reports reviewing an average of 1,250 product approval applications and conducting more than 850 quality assurance audits each year. Approvals can be looked up in the County's online Product Approval Search. [us-008]
Find out what you already have: roof shape, roof deck attachment, roof to wall connection, secondary water resistance and opening protection.
Have the official wind mitigation verification form completed by a qualified inspector.
Ask your insurance agent which credits apply to each feature before you spend money on upgrades.
Applied to your projectWind Mitigation Savings Check, USD 99 →
General information about Florida rules, compiled from official sources. Not legal advice and not an inspection or engineering opinion; for your own case ask a Florida licensed attorney, engineer or the building department.